Argon Modchip

From OzModChips Wiki

[edit] Pre install

Please check out the wiikey install guide on how to open your wii.

[edit] Installation

The install diagram is on the The Infectus download page

Please be careful - Argon is an upgradeable modchip with multiple settings. If you want region free gaming you must have 1.3 firmware installed which also required you to install the modchip on 4 more points.

Troubleshooting on infectus forums

[edit] Updating Argon

You will need an Injectus programmer

Firmware on The Infectus download page.

Steps:

1. Download drivers for the injectus
2. Download program for flashing
3. Connect injectus to your PC, and then your Argon to your injectus
4. Install the drivers on windows
5. Open up the Flashing program
6. Click 'Tools' then 'open infectus'
7. Click 'Load DAT', then select the argon firmware dat file that you can download from the infectus downloads section
8. Then click 'program'
9. It will hit 100%...then erase, then count up to 100% again, and then once more! It whole programming stage takes about 5 minutes. If it gets stuck at any point - try again. Make sure the light on the argon is on at all times. The last line you will see is "Verifying FPGA Array -- PASS"

You are able to update the Argon without installing it if you want.